Saturday, December 27, 2014

Automation is Taking Over?

ccjdigital.com

Why bother adding the ability to shift a crash box to the training required by a newbie driver?

I tend not to agree with the authors view as posted below. If you don't train a newbie truck driver in double clutching and shifting, that severely limits their ability to change employers if the prospective employer does not have automated trucks. Our company location has all manual transmissions, hires only experienced Class A drivers and would fail any road test that I would give him (her) if they can't shift. We pull Rocky Mountain doubles and Super-sets grossing up to 129,000 pounds and there are no practical automatics being built that could handle those loads in mountainous terrain. New drivers should be trained in those aspects and take pride in their ability to "do it right". In my opinion, the "professionalism" of many drivers has been in a downward spiral for many years.
Article thanks to Rolf Lockwood and truckinginfo.com. Links provided:

October, 2014  There’s a quiet revolution going on in that mechanical space between engine and drive axle. It’s the steady rise of transmission automation and the disappearance of that third pedal, the clutch, the one that befuddles new drivers almost without exception.
Some master the coordination of clutch and throttle in no time, some never come close, and the majority muddle on, blowing shifts here and there, grinding off a bit of finely cut metal once in a while.
At the pinnacle of skill in such things is the guy — and I’ve driven with one cool woman in this category — who can drift through the gears with a twin-stick as smoothly as anyone with an auto box. A joy to watch when it’s done well.
The question has become, why bother?
There are still countless holdouts because a manual gearbox is cheaper, for one thing, and without electronic controls, it’s a simpler piece of machinery.
Then there’s the pride thing. Lots of guys — and at least that one woman friend of mine — wouldn’t be caught dead without something for their left foot to do. But the number of holdouts is dwindling as automated mechanical transmissions get better and better, and the case for spec’ing them becomes more and more compelling. Even veterans who once said “no way,” usually change their minds after meeting the calmer, easier driving task created when they don’t have to think about which gear they’re in and which one they’ll need next.
So, when recruiters are forced to dip into a different corner of the gene pool where they simply don’t find drivers with traditional, old-school skills, the question changes a little — and transmission-spec’ing along with it. It really becomes, why bother adding the ability to shift a crash box to the training required by a newbie?
The automated mechanical may cost more than a straight manual gearbox at the outset, but the benefit could make it worthwhile, even if it’s a little intangible. That’s the logic applied these days by an increasing number of over-the-road fleets, some of whom will spec nothing but automation at the shifter.
And let’s not forget that fuel can be saved too. The latest auto boxes have shift logic that’s much better than they had when first on the scene, meaning smarter, more efficient, more sensible shift points. It’s getting harder to say, as we once could, that an automated transmission won’t improve on what your best drivers can do.
In the North American Class 8 world, automated mechanical transmissions hold about 30% market share these days, with growth of 2–4% a year predicted through the next five years or so. But, at Daimler Trucks North America, President and CEO Martin Daum is convinced his Detroit DT12 auto box will reach 90% of Freightliner’s build within the next four years. Volvo has been seeing big success with its I-Shift too, which was spec’ed in 60.7% of the trucks leaving the factory last year, up by nearly 50% over 2012. Eaton won’t divulge market-share information, but its latest UltraShift transmission has been well accepted, and in performance terms, it’s a far cry from the original AutoShift introduced way back in 1997.
Automated mechanical transmissions really are getting better and better, and one particular technology — the dual-clutch system — seems bound to improve things even further. Mitsubishi Fuso already offers one, Volvo has one for Europe and so does ZF. And now Eaton is set to launch its Procision globally.
This is the future, and it will make the case for automation even stronger.
Rolf Lockwood is vice president, editorial, at Newcom Business Media, which publishes Today’s Trucking. He writes for HDT each month on the making, maintaining and use of trucks. 
He can be reached at rolf@newcom.ca or 416-315-1829.
http://www.truckinginfo.com/article/story/2014/10/automation-is-taking-over.aspx?utm_campaign=Headline-News-20141020&utm_source=Email&utm_medium=Enewsletter&btm_ea=ZGJyaWRnZXJob3RAaG90bWFpbC5jb20=


No comments:

Post a Comment